Customers often call to inquire: a square meter of ground, how many concrete sealant materials need? In fact, the use of concrete sealant is determined by the ground conditions: the higher the ground strength, the less the demand for concrete sealant, the lower the construction cost. The following is the introduction of the conventional dosage of several concrete sealing hardener on the ground. Construction of concrete sealants on Diamond wear-resistant floor and terrazzo floor requires about 5 kg of concrete sealants per square meter of floor.
Concrete sealed curing floor
In general cement ground, that is, the strength of the ground above C20, the use of concrete sealant per square metre of the ground is about 4 kg, and the use of concrete sealant is difficult to estimate on the ground of loose, serious pulverization problems of cement ground, the use of concrete sealant needs to be determined according to specific circumstances; construction of concrete sealant solidification Chemicals generally require the strength of the concrete floor above C20, that is, the standard load-bearing value of the concrete is 20MPa.
The strength of the concrete floor is lower than the value, and the ground is relatively loose. Construction of concrete sealant on cement ground with strength lower than C20, the demand of concrete sealant is relatively large, and the construction effect is relatively poor.
The lower the strength of cement floor, the greater the construction capacity of concrete sealing agent, the higher the construction cost. The concrete usage of concrete sealant and curing agent depends on the concrete ground conditions, but also by the user's requirements for the use of the ground and the expected effect.
Construction concrete sealant curing agent requires that the ground strength is above C20, lower than this strength, then the corresponding measures should be taken to deal with, and then the construction of concrete sealant curing agent.本站网址：